|
MXTIME Inc. VALVE SEAT CUTTING
 With 900+
cylinder heads done, we have the experience and knowledge needed
for your modern 4 stroke!!
"Our everyday goal
is to continue to give better service, higher quality parts and
100% customer satisfaction."
We are continually
searching for better ways to serve you and the most up to date
products and techniques to get you the best possible
results....the choice is clear......MXTIME Inc.
Did You
Know?
*
As the hardness coating of a Titanium valve wears off, it works
its own "pattern" into the valve seat. 
* The cooling process of a valve
takes place when it is in contact with the seat.
* The contact patch between the
valve and valve seat becomes narrow and uneven.
* With diminishing contact area
the valve loses its ability to cool and overheats.
* Valve becomes soft and
deteriorates rapidly
* Heat is what Destroys Valves,
thats why its usually one Valve that loses clearance
(Intake, left on Kaw-Suz, Intake
right on Honda etc.)
* The Larger Intake Valves have
more mass and don`t disapate the heat as fast as the smaller
Exhaust Valves.
-THEN-
* When you install "new" valves in your head, the
hardness coating can deteriorate up to 40% faster as the new
valve tries to adapt to the uneven surface left by the old
valve. Each time you replace valves, the new set will not last
as long as the previous set. Thats why valve change intervals
DECREASE with each new set!!
* Valve seats are cut to
perfect alignment with valve guides. Wide, uniform contact patch
is restored!!
THIS IS A 3
ANGLE VALVE JOB!!! (30-45-60 degree)
*NO VALVES OR SPRINGS
INCLUDED*
75.00
& 85.00 seat cutting service includes:
Removal of old valves, cut valve seats to OEM specs.
PRICE DOES NOT INCLUDE ANY NEW PARTS. (valves,springs
etc.)
Valves can be purchased separately from MXTIME Inc.
*Seat cutting service*
*4
Valve heads - $75.00
(+$15.00 shipping)
To Pre Pay ADD
TO CART
*5
Valve heads - only $85.00
(+$15.00 shipping)
To Pre Pay
ADD TO CART
Our
Stainless Steel Valves and Heavy Duty Spring Kits can be
installed in your
4 Valve head for $425.00
complete
(including seat cutting and
assembly)
5
Valve Heads are $475.00
(including seat cutting and assembly)
(Includes Valves,
Springs, Base Washers, Titanium Retainers and Seat Cutting)
(One - Piece Ti
Valves are also available)
**Shipping
Insurance can be added at additional cost**
*Current turn-around time is 1-2 days*
Ship Head to:
MXTIME Inc.
4095 Westover Dr.
Crown Point In. 46307
(this is
our new shipping address)
I nclude,
Phone Number w/ area code, and Shipping Address
Email
dave@mxtime.com
to notify that head has been shipped to us
When head is received we
will call for credit card payment - or send Cashiers Check or
Money order with Head made out to MXTIME Inc.
|
